Frequently Asked Questions
Microplate Instrumentation
Frequently asked questions on Biochrom's microplate readers and washers
- Can ADAP software be used for analysis with my Biochrom Anthos microplate reader?
- Does ADAP 2.0 Software work with Windows 64-bit operating systems?
- How can I clean my Biochrom Anthos Fluido 2?
- How can I clean the manifold on my Biochrom Asys Atlantis Microplate Washer?
- How can I quickly measure a microplate using my Anthos 2020 microplate reader?
- How can I quickly measure cuvettes using the Biochrom Anthos Zenyth 200rt?
- How do I change a filter on my Biochrom Anthos 2010 ELISA Reader ?
- I have a new PC to control my ELISA reader. Will ADAP Software run under Windows 7?
- I need to measure low sample volumes. Can the spectrophotometer in the Zenyth 200 read low volume cuvettes?
- If a measurement is made by the Biochrom Anthos 2010 that exceeds the maximum indication range, how is that measurement represented?
- My instrument has an RS232 connector but my PC only has a USB. How can I connect them?
- What are common wavelengths used for absorbance measurements in the visible range?
- What is the indication range of the Anthos 2010 how does this differ from the linear range?
- What is the limit of detection of the Zenyth 200?
- What is the range of temperatures that the Zenyth 200rt and Zenyth 340rt can be set at?
- What is type of material used for the tubing in the Biochrom Asys Atlantis Microplate Washer?
- What printers are compatible with the Biochrom Asys Expert Plus?
- What types of microplates can be used in the Biochrom microplate readers and washers?
- When I try to operate my Biochrom Anthos Fluido 2 Microplate Washer; I get a warning that states "liquid empty" although my wash and rinse bottles are full. How can I fix this problem?
- When I try to operate my Biochrom Asys Atlantis Microplate Washer; I get a warning that states "liquid empty" although my wash and rinse bottles are full. How can I fix this problem?
- When measuring turbidity at 600 nm, why are measurements different between different microplate readers?
- When using ADAP software to control the Biochrom Anthos 2010, can specific wells be designated as blanks and can those values be automatically subtracted from the remaining wells?
- Which Microsoft Windows operating systems are ADAP compatible with?
- Which printers are compatible with the Biochrom Anthos MultiRead 400 Microplate Reader?
- Which printers are compatible with the Biochrom Asys Expert Plus?
- Why are performance specifications of microplate readers limited to 2.5 OD when the reader can measure samples which have absorbance values up to 4.0 OD?
- Why do I get different readings from the same sample in different wells in the mictrotiter plate?
- Why do I need to calibrate filters when using the DigiRead software to manage the UVM340?
- Why does my Anthos Fluido-2 microplate washer perform a prime rinse at the beginning of a procedure?
- Why does my Asys Atlantis microplate washer perform a prime rinse at the beginning of a procedure?
- Why is the absorbance reading of a solution in a cuvette different than a reading of the same solution in a microtiter plate well?
If you cannot find your question here, contact us directly and we will be pleased to help...
Top 3
- Why is there an arrow and why do my plastic cuvettes have two frosted sides?
[Spectrophotometry] - Why does sensitivity of ninhydrin response decrease with time?
[Amino Acid Analysis] - How does an amino acid analyzer work?
[Amino Acid Analysis]